| Reciprocal link page |
Upload
a link to us and we will link back to you ( Industrial or
Educational Related Site only please)
»
Click here |
|
 |
 |
Wintek
typically supplies liquid ring vacuum pump systems using:
Dekker Vacuum, Robuschi, and Travaini. We have also
supplied systems using: Nash, Siemens, SiHi.
They can be purchased as a bare shaft pump,
pump with motor, or configured in various complete standard
or custom systems:
Once-thru-water water sealed (includes sealant flow
controls and a discharge separator tank). Typically
used when water cost/use/disposal is not an issue. Water
hardness would be of concern for long term life. Any
process carryover is flushed out with the sealant water.
Full recovery water sealed (includes larger separator,
sealant controls and heat exchanger) reuses the sealant
water in a closed loop, so that any process is not in
contact with the cooling water. This type of system
is used when the facility has a cooling tower or chiller
for cooling water.
Full recovery oil-sealed (Vmax™) this pre-designed
package is a cross between an air-cooled rotary vane
pump and a full recovery liquid ring vacuum pump. The
pump is available as air or water cooled. It is used
in relatively clean and moist applications with minimal
carry-over concerns. |
Full recovery solvent
sealed (includes larger separator, sealant controls
and heat exchanger). This package is custom designed
to handle solvents, and may utilize a solvent as the
sealant. Any liquid solvent can be used to allow for
solvent recovery provided the required operating vacuum
level and cooling water temperatures are appropriate.
Selecting the right size: for all the advantages and
reliability of liquid ring vacuum pumps, determining
the correct size for an application is not very easy.
Wintek is an expert in the correct sizing/selection
of liquid ring pumps will help you through this step.
Many factors affect the operation of this pump, which
can be both good and bad: Cooling/sealant temperature,
vapor temperatures, solvents handled, vapor loads (dry,
saturated or partially saturated), sealant viscosity,
backpressure, etc.
|
|
|
The most rugged, most forgiving, and reasonably
priced type of vacuum pump available in the world.
- Capable of ingesting relatively large quantities
of liquid and soft solids (process upsets) without
mechanical damage.
- Very low maintenance requirements
- ISO9001 manufactured Available in cast iron, bronze
fitted, stainless fitted, all stainless and Hastelloy
|
Manufactured by
 |
| Company: |
Wintek Corporation |
| Products: |
Liquid Ring ,Rotary vane ,Dry
,Comparison |
| Website: |
http://www.wintek-corp.com |
| Tel: |
973-252-8200 ext 12 |
| Country |
U.S.A |
|
|
|
|
|
Company Info:
Wintek Corporation has been serving the vacuum needs of
the chemical, pharmaceutical, and environmental industries
since 1986. Our experienced staff of engineers ensure that
each system accomplishes all of our client tasks. Wintek uses
proven technologies and components to provide the highest
quality and most reliable systems possible, while still maintaining
a competitive cost. At Wintek, our main concern is to provide
the customer with the best vacuum system that meets his objectives.
In order to fully serve all of the needs of our customers
Wintek has the ability to offer dry vacuum, liquid ring, rotary
vane, or steam jet technology. Each of these technologies
have advantages and/or disadvantages relative to the customer's
objectives. Our philosophy at Wintek is to review with the
customer all of the different possible solutions to their
vacuum needs and explain the strengths and weaknesses of each
technology. We work with our clients from conception to completion
to ensure that all aspects of each project are covered.
|
|
|
