 |
Vacuum Dehydrator / Oil
Purifiers concept
The primary function of the VAC-DRI™ vacuum dehydrator
/ oil purifiers system is to remove free, emulsified,
and dissolved water from oil, as well as solid particulate
contamination. The secondary function of the system is
the extraction of air, gases, and light hydrocarbon contamination
from the oil. These functions are accomplished using the
principles of low temperature vacuum distillation and
micronic filtration |
 |
Manufacturer of oil purifiers,oil
purification equipment, transformer oil regeneration,
industrial oil filtration, oil reclamation, lubrication
systems, lube systems, oil conditioners .Oil Dehydration
Equipment - Oil Dehydrators, Vacuum Dehydrators, Vacuum
Dehydrators - Modle VPL Vacuum Dehydrators -for reduction
in oil life and for machinery components degradation.
The Filtervac vacuum dehydrator, which uses a vacuum process
to remove water, light hydrocarbons + solid contamination,
has proved to be a cost effective solution in many applications
such as • Lubrication Oils • Synthetic Fluids
• Hydraulic Oils • Quenching Oils •
Turbine Oils • Paper Machine Oils • Compressor
Oils • Cutting Mineral Oils • Gear Oils Filtervac
designs and manufactures vacuum dehydrators and vacuum
dehydration systems to meet your companies specific oil
purification needs |
 |
THE COST OF DIRTY OIL
CAN BE CATASTROPHIC -"The function of a filter is
not to clean, but to reduce operating costs."Over
75% of machine failures can be contributed to excessive
contamination. This can cause:Loss of production Component
replacement costs Frequent fluid replacement, Costly fluid
disposal Increased overall maintenance costs- Increase
scrap rate. Even if the system is running-there is a definite
possibility that it is not fulfilling its maximum yield
potential. Plus the life expectancy won't be anywhere
near as long as projected; a replacement required much
sooner than expected. |
 |
ThermoJet® Oil Purifier
Water Removal - RENTALS AVAILABLE
Simple Operation
The ThermoJet® works on the principal of air stripping.
The use of air or nitrogen bubbled through contaminated
liquids has long been used to remove contaminants. But
the use of this technique was restricted because the volume
of gas required was large due to limited mixing of the
gas with the liquid. The unique technology embodied by
the ThermoJet® makes air/gas stripping practical and
efficient because of the mixing and intimate contact of
the air/gas with the fluid being cleaned.
Water Removal
The ThermoJet® Oil Purifier not only removes free
water it also removes emulsified and dissolved water meaning
compressor, turbine lube oil and hydraulic systems can
be kept water-free. This results in improved reliability
of machinery and also eliminates the need for frequent
change of lube oil. The ThermoJet® out performs other
equipment such as settling tanks, coalescing filters and
centrifuges.
More http://www.lubrigard.com/products/ThermoJet.asp |
 |
Are
You Sensing Moisture Problems? EESIFLO’s Water Sensor
works with Dissolved Water Concentrations, Emulsions and
also free water !
Did you
ever wonder just how much water is in your hydraulic or
lube oil , diesel or fuel? Wouldn't it be nice to have
that information without sending the fluid out to a laboratory?
Free water in hydraulic, lubrication and fuel can impair
fluid performance and adversely impact equipment effectiveness,
uptime and reliability. Because concern is related to
the presence of free water, equipment operators need to
know the exact amount of water in the fluid. Since the
saturation point of a fluid can change over time, it is
important to know the total moisture or water content
in the liquid so that preventative measures can be implemented
before the damaging effects of water can take place.
More>>
|
Lubrication Oil Purifier
Application
oil purifiers are suitable especially for purifying and restoring
hydraulic oil, machine oil, coolant oil and various other lubrication
oil. The most common reason for breakdown of machinery which
has a lubrication oil system results from contaminated lubrication
in which has water, gas, impurities etc. An oil purifier is
supposed to rapidly remove water, gas, particulate matters and
impurities from lubrication oil and improve properties of lubricating
oil so as to greatly extend the lifetime of machinery which
has lubrication system.
Oil purification equipment is extensively used in the fields
of electric power, petroleum, natural gas, mechanical manufacture,
steel, metallurgy, railway, aviation etc. which consume lubrication
oil.
Related are
- Double-Stage High-Efficiency Vacuum Insulation Oil Purifier
- Double-Stage Vacuum Insulation Oil Automation Purifier
- Double-Stage Vacuum Insulation Oil Regeneration Purifier
- Double-Stage Vacuum Insulation Oil Purifier with Tester
- Turbine Oil series
- Turbine Oil Purifier
- Turbine Oil Automation Purifier
- Turbine Oil Regeneration Purifier
- Lubrication Oil series
- Lubrication Oil Purifier
- Lubrication Oil Automation Purifier
- Lubrication Oil Regeneration Purifier
- Gas Engine Oil Regeneration System
|
